Innovatek Graph-o-Matic Rev 3.0 GPU/VGA/Chipset Waterblock - Ships FREE!

Description

Back in the mid 2000's we (highspeedpc.com) were a reseller and distributor for Innovatek water cooling gear for the USA market.  Apparently
someone
here lost track of a few boxes which were recently brought out of storage.  New old-stock in sealed factory packaging!
Graph-O-Matic Rev 3.0 from legendary German liquid cooling pioneer Innovatek is a high-end graphics cards and chipset cooler for obtaining maximum cooling and performance. Graph-O-Matic Rev 3.0 fits nearly all VGA cards and Northbridge chipsets.
The attachment is easy using nylon screws, included in the package. For graphics cards or motherboards without mounting holes, the cooler can also be securely attached with thermal adhesive.
Full Retail sealed package
:
GOM 3.0 cooler: 50 x 40 x 33 mm (LxWxH); wt. 155 g
Compression Fittings: 2x 10/8 mm (8x1)
Nylon attachment screws
1 meter flexible 8x1 tubing*
Packet of white thermal compound*
Excerpt from Innovatek's website (translated from German, paraphrased for clarity):
Graph-O-Matic Rev 3.0 with 20 degree angled threads is an
extremely compact and yet extremely powerful water cooler
The water cooler is particularly popular for cooling chipsets and graphics cards (GPU), and its clever mounting frame means it can be placed almost anywhere.
Thanks to the two G 1/4-inch threads angled by 20 degrees,
the cooler takes up even less space in height
and is therefore suitable for particularly narrow areas.
But not only its flexibility is convincing here, the cooling performance is also impressive.
The XX-Flow flow design specially adapted to the water cooler and
the 7 mm thick base plate
(40 x 40 mm) made of coated copper achieve maximum cooling performance.
The water cooler is attached using the nylon screws included.
The screws as well as the mounting frame are made of glass fiber reinforced special plastic.
If there are no suitable mounting holes in the circuit board next to the chip to be cooled, the compact cooler can also be
safely attached with thermally conductive adhesive
.
You can of course easily swap the straight 10/8 mm connections for alternative connections with 1/4 inch thread in order to optimally integrate the cooler into your cooling system.
Note: When using a graphics card (GPU), adequate cooling of other components of the graphics card (voltage converter, ...) should always be ensured.
Properties:
Improved XX-Flow flow technology for maximum cooling performance
7 mm thick base plate made of coated copper
Fastening system made of glass fiber reinforced special plastic
Included:
1x Graph-O-Matic - 20 degrees, blue
1x screw set
1x thermal paste
Technical details:
Type:
Universal cooler
Colour:
blue
Dimensions:
50 x 40 x 33 mm (LxWxH)
Material:
Nickel-plated copper, highly tough special plastic
Weight:
approx. 155 g
Thread:
2x 1/4 inch
Connection:
2x 10/8 mm (8x1)
*Although this is a new old-stock item and has been stored in a climate controlled environment, we make no guarantees on the quality of the thermal paste or the flexible tubing.  The internal rubber O rings remain sealed tight within the cooler housing and compression fittings and should be fine,
but ALWAYS LEAK TEST your H2O cooling gear before installing!