XSPC PETG Easy Cut / Easy Bend Toolkit

Description

The PETG Easy Cut / Easy Bend Toolkit takes the hard work out of using PETG rigid tubing. Just follow these simple steps:
Insert the
Bending Rubber
into the PETG tube
Heat the tube at the bend point, using a heat gun or hair dryer (not supplied)
Insert the heated tube into the
PETG Easy Bending Tool
Bend the tube to the required radius and allow to cool
Remove the
Bending Rubber
from the tube
Use the
Heavy Duty Hose Cutter
to trim the tube to the required length
Insert each end of the trimmed tube to the
PETG Chamfer tool
and rotate anticlockwise
Use the
Sand Paper
to clean up the chamfered edges
Kit includes:
Heavy Duty Hose Cutter
- The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw.
PETG Easy Bending Tool
- This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (
Suitable for 12-14mm outer diameter tubing)
Bending Rubber
-
Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm)
PETG Chamfer Tool
- Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise.
PETG Edging Sandpaper
- Ideal for sanding the edges of PETG tubing, after using a chamfer tool.